User's Manual

2 – Operations and Administration
D000003-006 Rev. A 2-33
Q
Disabled
Following an Auto Restore of a configuration file to a virtual I/O card, the
system sets the virtual I/O card mode to Disabled. This allows the user to
verify that the configuration file is correct, before returning the virtual I/O
card to Auto Backup mode. In the Disabled mode, use the Backup and
Restore buttons to either back up or restore a configuration file.
Auto Backup
All configuration changes to a virtual I/O card are automatically backed up
to the CMU.·
Auto Restore
The most recent configuration file is restored to a virtual I/O card inserted
into a specific Chassis slot. This is useful as a prerequisite to hot swapping
a virtual I/O card.
6. To save, click on Apply.
NOTE: The Clear button deletes the configuration file from the CMU on the
switch.
2.2.7.2
Host Upload/Download
The Host Up/Download screens allows the user to:
❥ Upload configuration files from a server to the CMU.
❥ Download saved configuration files from the CMU to a server.
Figure 2-52. Configuration File Administration - Host Up/Download
1. Click the chassis view.
2. Click Config File Admin.