User's Manual

2 – Operations and Administration
D000003-006 Rev. A 2-35
Q
2.2.7.3
Trap Control
The Trap Control screen allows the user to set default trap scenarios related to
configuration files.
Figure 2-55. Trap Control
1. Click the chassis view.
2. Click Config File Admin.
3. Click Trap Control. The Trap Control screen is displayed:
Figure 2-56. Configuration File Trap Control Screen
4. Select or deselect the desired trap(s).
NOTE: To generate an immediate trap, click the applicable Gen Trap button.
5. To save settings, click on Apply.
NOTE: If the checkbox is not checked the Gen Trap button will not generate a
trap.
Following are definitions for each configuration file trap:
CfgSrvBackupFailed
The server was instructed to backup a file for a particular slot, which failed.
CfgSrvSyncError
Synchronization to the slave CMU failed. The problem should be resolved and
attempted manually.