User's Manual

3 – FVIC Configuration and Monitoring Features

D000003-006 Rev. A 3-17

In addition to using the method above, the user can click on the Click to Add Host

button in the Discovered Hosts table to add and configure IB hosts.

Figure 3-31. Click to Add Host Button

1. In the Discovered Hosts table, click the Click to Add Host button. The

following is displayed:

Figure 3-32. Add Host Window

2. In the Initiator GUID text box, enter the 16-digit SRP Initiator port GUID number.

NOTE:A user can determine an HCA 7000 or HCA 9000 Port GUID by entering

the following at any host prompt:

❑ p1info for port 1

❑ p2info for port 2

3. In the SRP Extension ID text box, enter the 16-digit SRP Extension ID number.

NOTE:The user can find the SRP extension ID in the ics_srp configuration file.

4. In the Name text box, enter an applicable host name.

5. Click Submit. The host will now appear in the Configured Initiators table.

Using the Click to Add Host button is also useful for wildcarding IB hosts.

Wildcarding allows the user to create SRP Initiators that can be utilized by multiple

hosts. In the following example, the Initiator GUID will match any host using

"InitiatorExtension: 20" in its session definition (as defined in the ics_srp.cfg file).