3-D VR Smartphone USER’S GUIDE Model: Qphone2019_A 1
Thank you for choosing our mobile native 3-D phone, the Q phone. This User's Guide is intended to guide you through the functions and features of your new Q phone. Please read the below instructions first ·Before using the Q phone, please read all safety precautions and User's Guide carefully to ensure safe and proper use. · The descriptions in this manual are based on the default settings of the mobile Q phone.
applications are not within the scope of Qoobex’s responsibility. · Performance problems or incompatibilities caused by user's editing the settings are not within the scope of Qoobex’s responsibility. · Additional charges may incur for sending and receiving messages, uploading and downloading, automatic synchronization, or using the location service. To avoid additional costs, please choose the appropriate data charging scheme. For more information, contact your service provider.
Installation Accessories Introduction Check if the following items are present in the product box: . Q Phone native 3-D VR with 5.99’’ screen (including battery) . Travel Charger (Charger) . USB cable . Earbuds . Card pin Use only approved software. Piracy or illegal software may cause damage or malfunction, which are not within the scope of the warranty provided by Qoobex.
To install SIM and SD cards: 1. If the Q phone is on, press and hold the Startup & Shutdown button, then select Shut Down → OK to turn off the Q phone. 2. Use the card pin to insert the hole at 90° to eject the card holder. 3. Insert the SIM card, and/or SD card into the SIM card holder. Smoothly push the card into this card holder according to the direction indicated by the lost corner of the card. CAUTION. Use a regular card provided by the service provider. The cut cards damage the card slot.
Improperly connected travel charger may cause serious damage to the Q phone. No warranty will be given for any damage caused by incorrect operation. 2. Plug the large end of the plug of the Travel Charger into a standard power outlet. The Q phone can be used while charging, but this will extend the time it takes for the battery to get fully charged. When the Q phone is being charged, the touch screen may fail due to power instability. Now you can unplug the travel charger from your mobile Q phone.
Charge with computer USB cable Before charging, make sure the computer is turned on. 1. Plug one end of the computer's USB cable (mini-USB) into the multi-function jack. 2. Connect the other end of the computer's USB cable to the USB port on your computer. Depending on the type of USB cable used, it may take a moment to start charging. 3. When the battery is fully charged (the battery icon is no longer showing charging), disconnect the USB cable from the Q phone, and then unplug it from the computer.
Specifications Product Qphone2019_A 5.99’’ Native HD 3-D display technology 3-D Technology Native 3-D picture & video / IPS / FHD 2160*1080 / 16 M Best range of 3-D visibility：40-60cm Processor Main Processor Eight core processor MediaTek MT6757 2.8+1.6 GHz / A53 / 16 nm FFC Technology Graphics Processor Mali-T880 MP2 900 MHz Technology Operating system Android 9.
Wifi 802.11 a / b / g / n / ac, 5GHz GPRS/EDGE : Yes Data Bluetooth V4.0 FM: Yes GPS: GPSAGPSGlonass Camera Back Native 3-D VR: Dual 13 MP +13 MP PDAF with Flash Camera Front 16 MPFF Capacity: Built-in 3.85 V, 3300mAh lithium polymer Battery Input: AC100-240V.50-60H Output: 5V 2A Type-C 3.
3D sensor: Yes Sensors Proximity and Light: Yes Fingerprint: Yes, back E-Compass/Gyro Sensor: Yes Input / Output I/O Port: Type-C 3.0 Port, 2 SIM Cards in Slots 1 & 2 or 1 SIM in Slot 1 and 1 TF in Slot 2 (UP TO 128GB) Mic/Speaker: 2 pcs Sensitive microphone (Built-in) / 1 pcs Speaker(BOX) Video Qoobex native 3-D, and 2D MP4, MKV, AVI, MOV, 3GP, FLV. Image Qoobex native 3-D photos, and 2D JPG, GIF, PNG, BMP Audio type AAC, flac, APE, MKA, OGG, MIDI, M4A, AMR, MP3. Documents TXT, PDF, etc.
Start Guide Start up, Shut Down and Restart To turn on your Q hone, press and hold the Startup/Shutdown button. To turn off your Q phone, press and hold Startup/Shutdown button, then select Power off. To restart your Q phone, press and hold the Startup/Shutdown, then select Restart. In areas where wireless devices are restricted, such as on airplanes and hospitals, follow all posted warnings and instructions from officials. To use only non-network services on your Q phone, switch to Airplane mode.
touch screen before using the Q phone. The touch screen has a detection layer that detects weak pressure from the human fingers. To achieve the best performance, use your fingertips to tap on the touch screen. The touch screen does not respond normally to a touch operation using a sharp tool such as a pen. You can control the touch screen by doing the following operations: Picture 1 1. Picture 2 Picture 3 Picture 4 Picture 5 Tap: Touch once to select or activate a menu, option, or application.
If you do not use your Q phone for a specified length of time, it will turn off the touch screen. To turn on the screen, press the Startup/Shutdown button momentarily. Lock or unlock the touch screen and buttons You can lock the touch screen and buttons to prevent accidental operation of the Q phone. To lock, press Startup/Shutdown button. To unlock, press the Startup & Shutdown button to turn on the screen, then slide your finger to the unlock area.
In the standby mode or while using the application, click the indicator icon area and drag your finger down to open the shortcut panel. You can activate or deactivate the wireless network connection and access the list of notifications, such as messages, calls, activities, or processing status. To hide the list, drag the bottom border of the list up. In the Shortcuts panel, you can have the following options: · Screen Brightness: Adjust the screen brightness level. ·WIFI: Enable or disable WIFI connection.
Access applications To access the Q phone's applications: 1. In home page from the bottom of the screen scroll up. It appears the applications list. 2. Scroll up and down to browse to the applications list. 3. Launch the application by taping once on its icon. 4. You can drag the icon to the home screen by keep pressing down on its icon. Then drag and release the app icon into the desired home screen.
Auto Rotation If you rotate the device while using some functions, the device interface automatically rotates. To prevent the interface from rotating, open the shortcut panel and deselect Auto Rotate. Use USB Plug in the USB cable of your Q phone to connect to a computer. Q phone screen shortcut panel will show that the USB cable has been connected. In the computer you identify Q phone in the USB devices with the name ‘Q phone 2019’.
· Sound settings To easily access the sound settings click once once of the volume keys. Then tap in the gear-settings icon in the bottom of the volume bar menu. The sound settings page appear and you can arrange all your sound preferences: Media, Call, Ring, Alarm volume, Vibrate on calls, Ringtone, Do not disturb and more.
· Home screen, Wallpapers and Widgets settings In the home screen tap and hold down to any area clear of app icon.
Wallpapers, Widgets, Home settings menu appears. Arrange your preferable settings accordingly. · Adjust the brightness of the display screen You can arrange the preferred screen brightness through the brightness bar on the top of the shortcut page or through the Settings → Display → Brightness level. The brightness level of the display affects the speed at which the Q phone consumes battery power.
Select Settings → Security & Location.
· Use language and keyboard Select Settings → System → Languages&Input. 1. Select Language. You can select one or more languages. 2. User Dictionary. Manually add the words or characters you need. 3. Input method. When selected, use such input method to input characters in the editing interface. 4. Arrange the additional input options according to your preferences..
· Copy and Paste text When you enter text, you can use text in other applications with copy and paste. 1. Place the cursor over the text you want to copy, and hold and drag the words or select all, select the desired text and then click Cut or Copy. 2. In another application, place the cursor over the place where you want to paste the text. Touch and hold Select → Paste. · Download the installation files from the network Files downloaded from the network may contain viruses that can damage your Q phone.
Communication Calling Learn how to use call functions, such as making and receiving calls, using available options during a call, or customizing and using call-related features. · Make and receive calls When you make, answer, end, or reject a call, you can use buttons or touch screen. When the distance sensor is turned on, the Q phone automatically turns off and locks the touch screen to prevent accidental input when the Q phone is close to the face.
· Reject Calls When there is a coming call, drag to the left. · Make International Calls 1. In standby mode, select Phone → Keyboard, then press 0 to insert a + sign. 2. Enter the full number you want to dial (country code, area code, and phone number), and select Call. · Use headphones Plug your headset into your Q phone, and you can answer calls and use handsfree functions: . To answer a call, briefly press the headset button. . To reject the call, press and hold the headset button. .
7. Start recording: Starts the recording. · Check the History of Calls You can check the history of calls based on the types. 1. In standby mode, select Dialer Options → Call History. 2. Press "All" to display missed calls, received calls, and dialed calls. · Information Learn how to create and send text messages (SMS) or multimedia messages (MMS), and check or manage the sent or received messages. · Send Messages 1. In standby mode: select Messages → Create message 2.
commas to separate multiple numbers or addresses. Select: You can select a phone number or an e-mail address from the list. When you enter an e-mail address, the Q phone converts the message to a multimedia message. 3. Press Menu → Add Theme, and then add a message theme. 4. Select: Tap to enter the message, and then enter the message text. To insert an emotion icon, press the keyboard Smile → Insert smiley symbol. 5.
· Taking Pictures 1. In Idle mode, open the application list and select Camera to turn on the 2D camera. 2. Point the lens at the object and make the necessary adjustments. The customized settings of the camera interface from left to right are as follows: 1. Focal length can be adjusted among 1X-4X. 2. Flash Mode. You can turn on the auto flash or turn on the continuous flash or turn off the flash. 3. White Balance. Set the balance color.
4. GPS Location. Set the GPS location to ON or OFF. 5. Camera parameters. You can set the camera mode, continuous shooting, ISO sensitivity, self-timer and other functions 6. View parameters. You can set the exposure value, framing mode, photo size and other functions 3. Tap the Camera button to take a 2D photo. 2D photos will be automatically saved, and you can check the 2D photos by clicking on the picture box on the right. To check more 2D photos, scroll left or right.
3. Check the 2D camera status. 4. Start recording. End recording. The 2D video is automatically saved. After recording a 2D video, select Image Viewer to view the recorded 2D video. To view more 2D videos, scroll left or right. To send a 2D video to others, select Share. To play a 2D video, tap Play. To delete a 2D video, select Delete. Learn how to use the 2D video player to play a variety of 2D videos. 2D video player supports the following file formats: 3gp, mp4, avi, mov, flv.
If the file size exceeds the available memory, an error occurs when opening the file. To add music files to your mobile Q phone, you need first transfer the file to your Q phone or memory card. Click on Music in the application list, and your Q phone will automatically search music files from the memory card. Click to play the song. Click the menu button to start the following functions: 1. Shuffle Play: shuffle play the music in the music library. 2. Music Library: Click to enter music list of artists.
· Listen to the radio 1. Plug your headset into your Q phone. 2. In standby mode, open the application list and select Radio. The first time you turn on the FM radio, the Q phone starts auto-tuning. Auto - FM can only locate stations whose signals are strong enough. 3. Click on Menu → Search: to search for and save the available radio channels. 4. Click the list to enter the list of available stations that have been found. 5. Add to Favorites, in the Playback Interface, click. Add to Favorites.
Contact Person Learn how to create and manage personal or business contact person lists. You can save contact person's name, phone number, home phone number, e-mail address, birthday, and so on. · Create a Contact Person In the standby mode, select the contact person and click it, the Q phone will display the following functions: 1. Search: go into the Search and ‘Enter’ a contact person to quickly locate a contact number. 2.
7. Accounts: You can add accounts or Exchange accounts to synchronize contacts. 8. Share the visible contact: You can send contacts saved in your Q phone or SIM card to an SD card, e-mail, SMS, or Bluetooth.
Clock You can set and control the alarm and world clock, through the clock app. You can also control the stopwatch and desktop clock through the clock app. · Set a new alarm In standby mode, open the application list and select Clock → Alarm. 2.
· Stop the Alarm To stop the alarm when the alarm sounds, click "Cancel" to stop the alarm. To repeat the alarm after the specified time, click "Pause". · Delete the Alarm Select the alarm you want to delete from the list, and the Q phone will pop up the editing interface, and you just need to click "Delete Alarm" button. · Create World Clock 1. In standby mode, open the application list and select Clock → World clock. 2.
Calculator 1. Open the application list and select Calculator. 2. Use the buttons corresponding to the calculator display to perform the basic arithmetic operations. Go to "Advanced Panel" to turn on the scientific calculator. The internet The network service requires a data connection. Contact the service provider and choose the best data plan. · Browser You can access your favorite pages and add them to your bookmarks, through any web browser available for Android 9.0.
need for a physical connection. When sending messages using Bluetooth, you don't need to use wires to connect the equipment. Even if the devices are located in different rooms, as long as the distance between two devices does not exceed the Bluetooth reception range, they can exchange information. When sharing and receiving data, make sure that the appropriate device is properly secured and that it is a trusted device. If there is an obstacle between the devices, the effective distance may be shortened.
fixed Bluetooth PIN (eg 0000). If the device to be marched has a PIN code, you must enter the corresponding PIN. · WIFI Learn how to use your Q phone's wireless network function to start and connect to a wireless local area network (WIFI) that conforms to the IEEE 802.11 a / b / g / n standard. You can connect to the Internet or a connector or other network equipment that can be used by wireless hotspot. · Start WIFI function In standby mode, open the application list and select System Settings → WLAN.
2. Enter the SSID of the network and select a security type. 3. Set the security settings according to the selected security type. 4. Select Save. If you use WIFI protection settings (WPS) to connect o WIFI, you can use WPS to connect to a secure network. 3D Videos and Photos There are the following options in the 3D application: 1. 3D Gallery, 2. 3D video and 3. 3D camera menu. 3D Gallery: 1.
2. Open a picture: If the 3D mode is not displayed, you can click the picture pop-up function menu; Open the "3D Raster" and select the "left and right intertwined" in the interleaved mode (in default setting, 3D photo albums supports 3D pictures with expanded name of Jps, .mpo, and it automatically synthesizes it into a 3D picture).
3. Slide the TP left or right to switch to the previous or next picture. 4. Eye tracking is used to determine whether the eyes leave the effective range: within the camera range, red frame means that it exceeds the raster angle, and the eyes can't view 3D picture normally. Note: the format to display the picture is half-width 3D picture. In default setting, 3D photo albums support 3D pictures with expanded name of Jps, .mpo, with automatic interleaving.
3D Video: 1. Click "3D Video" on the 3D application interface to see the video list after entering the application. 2. Open the video, and if it isn't in 3D mode, you can click the picture pop-up function menu; Open the "3D Raster" and select the "left and right intertwined" in the interleaved mode. 3. Eye tracking is used to determine whether the eyes leave the effective range: within the camera range, red frame means that it exceeds the raster angle, and the eyes can't view 3D picture normally. 4.
Note: the format to display the picture is left and right half-width 3D video. It will automatically detect whether it is a 3D video. The video is compatible with 3D MP4, AVI, MKV, 3GP, FLV and other formats (depending on the encoding format). Audio is compatible with AAC, flac, APE, MKA, OGG, MIDI, M4A, AMR, mp3, etc. (depending on the encoding format). 3D Camera: 3D camera has functions of 3D shooting and 3D video recording. Enter the 3D camera, you can do calibration for two cameras at the same time.
Note: Due to the intersection angle of the dual view, for objects within 1 meter, you need to do re-calibration of it and save it once again. Troubleshooting · The mobile Q phone shows errors of the network or service When you are in a weak or poorly received area, your Q phone may lose reception capability. Please move to a different location and try again. Some options may not be available because they need subscription by your carrier. Please contact your service provider for more details.
authorized service center. · Call interrupted When you are in a weak or poorly received area, the network connection may be disconnected. Please move to a different location and try again. · Outgoing call cannot be reached Make sure that the numbers are actually pressed. Make sure you are on the correct cellular network. Make sure that call restrictions are not set for dialed phone numbers. · The incoming call cannot be reached Make sure you are on the correct cellular network.
Make sure that the number stored in your contact list is correct. If necessary, re-enter and save the number. Make sure that call restrictions are not set for the number of contact person. · The Q phone beeps and the battery icon flashes The battery is low. You need to charge the battery or replace the battery before continuing to use the Q phone.
Make sure that the USB cable is compatible with your Q phone. Make sure that the appropriate driver is installed on your computer and that the driver has been updated. SAFETY PRECAUTIONS To protect you and others from injury or to protect your Q phone from damage, please read all of the following before using your Q phone. · Treat and dispose the batteries and chargers carefully Use only approved batteries and chargers designed specifically for your Q phone.
temperatures. Extreme temperatures can cause the deformation of your Q phone, lower the charge capacity and shorten the useful life of its battery. Prevent the battery from contacting metal objects, or else the positive and negative terminals of the battery may be connected, causing the battery to be temporarily or permanently damaged. Do not use a damaged charger or battery. Note: When using your Q phone in a restricted area, follow all safety warnings and regulations.
Use of mobile phones in aircraft is illegal, mobile phones may interfere with the aircraft's electronic instruments and communications. The electronic equipment of a motor vehicle may fail due to the radio frequency of your Q phone. Automobile's electronic equipment may fail due to the radio frequency of your mobile Q phone. · Keep and use your Q phone correctly and dry Moisture and various liquids may damage the parts or electronic circuits of your Q phone.
as on the car dashboard. Store the battery in an environment of 0 ° C to 40 ° C. · Do not store your Q phone near or inside water heaters, microwave ovens, hot cooking equipment, or high pressure vessels. The battery may leak. Your Q phone may overheat and cause a fire. · Use the batteries, chargers, accessories and supplies approved by Qoobex Using a universal battery or charger may shorten the life of your Q phone or cause it to malfunction.
phone, it may cause itching, eczema, or skin swelling. When this happens, please stop using your Q phone and consult a doctor. · When cleaning your Q phone: Wipe your mobile Q phone or charger with a towel or eraser. Clean the battery contacts with a cotton ball or towel. Do not use chemicals or cleaners. · Do not use your Q phone when the screen has cracks or damage Broken glass may hurt your hands and face. Take your Q phone to an authorized service center by Qoobex to repair it.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
