user manual

1 Connect one end of the 60 Ft. cable to the cable that is pre-connected to a camera.
2 Connect the other end of the 60 Ft. extension cable to the DVR.
3 Plug the power connecter on the 60 Ft. extension cable into the 4 way splitter. (Repeat)
4 Plug the 4 way splitter cable into the camera power adapter.
5 Plug the power adapter into a surge protector*. (Repeat these steps for each camera)
6 Plug the DVR power adapter into the back of the DVR.
7 Plug the other end of the DVR power adapter into a surge protector.
8 Finally, plug the surge protector in to an electrical outlet.
When you start your system for the rst time, follow the simple login instructions and then
change the username and password.
*When selecting a surge protector, it is STRONGLY recommended to use one that is UL-1449 rated, for a
clamping voltage of 330 or lower, a Joule rating of at least 400 and a response time of 10 nanoseconds or less.
QSDR74RTS DVR
w/Built-in 7” LCD Display Screen
4 Camera Cables BNC (M) – RCA (F) Adapter
Power Supply & 4 -Way
Splitter For Cameras
Pre-Installed Hard Drive
4 Cameras with Stands
2 QSDS0612D Cameras (6MM LENS)
2 QSDS3612D Cameras (3.6MM LENS)
Box Contents installation made easy
Power Supply For DVR
Software CD
Quick Start Guide
User Manual (this manual)
Ethernet Cable
USB Mouse
Remote Control