user manual

manUal ReCoRdinG:
From the Record Setup screen set the Rec Mode to “ALWAYS”. Your DVR will continuously
record and separate les will be created with the Pack Time intervals you selected.
time sChedUle ReCoRdinG:
From the Record Setup screen, set the Rec Mode to “TIME SCHEDULE RECORD” and click
“SCHEDULE” in green. This will display the Schedule menu (see below image). Select the
channels (cameras) that you wish to record on a schedule. The options are: All, CH-1, CH-2,
CH-3, and CH-4 respectively. The channel you select will be highlighted in “Blue”, and the
unselected channels will be “Grey. Click on the green GENERAL option box then click on the
boxes for the days and times that you want to record using this option on the timeline. You
can use the [From – To] pull-down menus and COPY button to copy settings from one day to
another day, or all days. Your DVR will record on it’s Time Schedule, and separate les with the
Pack Time Interval you selected. Click APPLY to activate your customized schedule, and then
reboot the DVR.
The Motion detection Menu has three sections,
including Channel Status, Sensitivity and
Motion area.
STATUS: This option allows you enable motion
detection on any channel.
SENSITIVITY: This option allows you to set
sensitivity level of motion detection from 1 to 4,
with 4 being the highest.
Next, click on the MD AREA SETUP button,
which will display the picture on the left. This
option allows you to select the area you want
to be sensitive to motion. The area in red is
sensitive to motion. You can set this area by
using the mouse or REV, FWD, and SEL keys
on the front panel. Once you have set the area,
right click with the mouse or push the ESC key
to save the setting. After you have set all of the
cameras, click on the Apply button to save the
settings.
Image 39
Grid Explanation:
Red = Alarm (motion detection) recording
Green = General (time schedule) recording
Transparent = No recording
Blue = The channel and date selected.
motion deteCtion ReCoRdinG:
From the Record Setup screen, set the Rec Mode to “TIME SCHEDULE RECORD” and click
“SCHEDULE” in green. This will display the Schedule menu (See “SCHEDULE” image on
previous page). The options are: All, CH-1, CH-2, CH-3, and CH-4 respectively. The channel
you select will be highlighted in “Blue”, and the unselected channels will be “Grey. Click on the
red ALARM option box then click on the boxes for the days and times that you want to record
using this option on the timeline. You can use the [From – To] pull-down menus and COPY
button to copy settings from one day to another day, or all days. Your DVR will record on
Motion Detection. Click APPLY to activate your customized schedule.
Next, go to the Devices option (“MAIN MENU” image below) and select the Motion Option
(“DEVICE MANAGEMENT” image below), which will display the Motion Detect Box.
You can also click on the DEFAULT button to use the system defaults. The system default
settings are:
Hr 01:00 am-07:59 am : No recording
Hr 08:00 am-18:59 pm : General recording (Time Schedule)
Hr 19:00 pm- 00:59 am : Alarm recording (Motion Detection)