Quick Installation Guide 4 Channel H.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR414-430 PART 1 - PACKAGE CONTENTS: QR414 DVR Power Supply For DVR Software CD 2 Color CMOS Cameras with Stands (2) QSM1424W (3.6mm Lens) Power Supply & 2 -Way Splitter For Cameras Ethernet Cable 1|Page 2 Decoy Dome Cameras Camera Cables (2 Included) USB 2.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR414-430 PART 2 - DVR CAMERA AND POWER CONNECTIONS Please note that it is STRONGLY recommended to use a surge protector that is UL-1449 rated. Look for a clamping voltage of 330 or lower, a Joule rating of at least 400 and a response time of 10 nanoseconds or less.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR414-430 PART 3 - DVR CONTROLS: FRONT PANEL Item Number Button Name 1 HDD 2 POWER INDICATOR 3 IR Receiver Symbol Function When the “Red” Indicator Light Flashes, it Means the Hard Drive is Being Read or Written to If the “Green” Indicator Light is on, the System is Getting Power Receives Signal from Remote Control CH1 CH2 4 Select Single Channel Display CH3 CH4 5 QUAD Display all Cameras in Live Display or Playback Mode 6 REW Move Left/Revers
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR414-430 PART 4 - ACCESSING THE DVR MENUS Choose MENU by right clicking on the mouse or by pushing the MENU button on the DVR front panel or remote control. The Main Menu offers the following Setup Features: CAMERA: Setup name display, position, image view, and record quality of each channel (cameras). RECORD: Enable recording & audio, set resolution & quality, recording mode and file size. NETWORK: Setup Network access (Remote Internet Monitoring).
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR414-430 PACK TIME: Choose the time length of all recorded files: 15, 30, 45, 60 min. (Max = 60 min) Grid Explanation: Red = Alarm (motion detection) recording Green = General (time schedule) recording Transparent = No recording Blue = The channel and date selected. Manual Recording: From the Record Setup screen set the Rec Mode to “ALWAYS”. Your DVR will continuously record and separate files will be created with the Pack Time intervals you selected.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR414-430 The Motion detection Menu has three sections, including Channel Status, Sensitivity and Motion area. STATUS: This option allows you enable motion detection on any channel. SENSITIVITY: This option allows you to set sensitivity level of motion detection from 1 to 8, with 8 being the highest. Next, click on the MD AREA SETUP button, which will display the picture on the left. This option allows you to select the area you want to be sensitive to motion.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR414-430 File List: On the Video search menu mode, click Search then File list to display the sub-menu shown in the picture on the left. This option will allow you to view all of the available files by channel and type (all, normal, or alarm). You can select a file and push the SEL button to playback the file, or use the FWD button and down button to select the backup option and backup the recorded file you selected.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QR414-430 Questions or Comments? Contact Us: Mailing Address: Customer Service: DPS, Inc. 8015 E. Crystal Dr. Anaheim, CA 92807 Phone: 877-998-3440 x 538 Email: cs@dpsi-usa.com Live Chat from our Website Website: Tech Support: http://www.q-see.com Phone: 877-998-3440 x 539 Network support x 540 Email: ts@dpsi-usa.