Introduction Table of Contents Introduction Feature 2 2 Speaker Feature Bluetooth AV Dongle Feature Specification 3 Speaker Section Bluetooth AV Dongle Section Unpacking Appearance and Controls Power Resource 3 4 5 Speaker Bluetooth AV Dongle Indicator Operation Thank you for purchasing NS -BT007. Before using the unit, please read this manual carefully, to obtain the best possible performance from your speaker. Please keep this manual for future reference.
Specifications Appearance and Controls Speaker Section -Bluetooth Version 1.2 -Class 2 (up to 3.3 feet) -Support A 2 DP & AVRCP -Maximum output power: 2 W X 2 -Compatible bluetooth profiles: A 2 DP /AVRCP -Power: 4 X AA batteries - Usage Time: Up to 4 Hours (The temperature or conditions of use has an effect on usage time) - Dimension (L/W/H): Approx. 15 2 x 15.2 x 1 3 9.6 4 mm (5.985 x 5. 9 8 5 x 5. 5 in.) 1 3 4 2 Bluetooth AV Dongle Section 5 - Bluetooth Version 1.
Appearance and Controls Power Sources Power/Pairing Button Power on/off: Press and hold the power button for 3 seconds Pairing: In off mode, press and hold power button for 8 seconds. Bluetooth AV Dongle Mini USB Port Recharging the internal battery or power the dongle 3.5mm Phone Jack Connect any music device by 3.5mm plug 14 When LED flashes red, it indicates that the battery is low. Low battery may cause the product’s quality to lessen, please replace new battery at that time.
Operation Operation Using By Connecting with Bluetooth AV Dongle Using By Connecting with Bluetooth Mobile phone 1. Press & Hold the Speaker Pairing Button Flashes Red & Blue 1. Press & Hold the Speaker Pairing Button for 8 seconds until the LED flashes red & blue. for 8 Seconds until LED alternately Red & Blue LED flash 2. Press & Hold the Dongle (Base) Pairing button alternately Flashes Red & Blue for 8 seconds until LED 2.
Operation Precautions 6. Start your music player from your mobile phone. 7. If your phone supports AVRCP, the main speaker button is able to control Play/Pause/Next Previous Song. 8. If your phone supports A2DP, the speaker will produce a stereo sound effect. 9. You can adjust the speaker volume with the Bluetooth Mobile Phone supporting AVRCP. Remark: Speaker will remain in pairing mode for 1 minute. If the pairing fails, please turn off the device and restart steps 1 - 5.
What is Bluetooth Technology? Precautions In such a case, perform the following: 1. Use the NS-BT007 at least 33 feet away from the wireless LAN device. 2. If the NS-BT007 is used within 33 feet of a wireless LAN device, turn off the wireless LAN device. 3. Install the NS-BT007 and Bluetooth device as near to each other as possible.
Troubleshooting Guide Nextar Low sound level *Turn up the volume of bluetooth source device or speaker. *Replace all the batteries. *Charge the bluetooth AV Dongle. TM a trademark of Nextar (Hong Kong) Limited Nextar may find it necessary to modify, amend or otherwise change or update this manual. We may reserve the right to do this at any time, without any prior notice. All specifications and features are subject to change without notice.