- Digital Peripheral Solutions Speaker System User Manual

Appearance and Controls
14
Power/Pairing Button
Power on/off:
Press and hold the power button for 3 seconds
Pairing:
In off mode, press and hold power button for 8 seconds.
Mini USB Port
Recharging the internal battery or power the dongle
3.5mm Phone Jack
Connect any music device by 3.5mm plug
14 Indicator LED
Power Sources
When LED flashes red, it indicates that the battery is low. Low battery may cause the
product’s quality to lessen, please replace new battery at that time. If you wish to
continue to
use the speaker at low battery level, the speakers will automatic turn off
after period
of time to protect the product.
Bluetooth AV Dongle
1. To charge the Dongle, plug the mini USB cable to USB interface. 2.
To charge your AV dongle by the provide USB adaptor:
a. Plug the mini USB into the USB adaptor, and
b. Plug the USB adaptor into the wall plug.
Bluetooth AV Dongle Bluetooth AV Dongle
USB
Power Sources
Speaker
1. Unscrew/Open the battery door
2. Install 4 AA batteries into the battery compartment, and screw tide the battery door.
USB Cable
Indicator
Status
Adaptor
USB
USB Cable
Port
Indicator (Blue) Indicator (Red)
AA X 4
Open
Speaker
Dongle
Close
Power on/Standby Flash
Play Flash
Power off Flash
Pairing Mode Flash Flash
Low Battery Flash
Power on/Standby/play Flash
Pairing Mode Flash Flash
Low Battery Flash
Charging On Steady
Full Charging On Steady
5 6