Remote Monitoring Guide

32 33
PICTURE 3-24
Within the Explorer window, the display has several sections, each with their own function.
1
2
3
6
4
5
Item # Area Function
1 Operations Separate controls for DVR features including video
search, alarms and logging out
2 Channel Controls Select which cameras to display along activating
bi-directional chat if available
3 PTZ Controls Controls for any attached PTZ cameras
4 Picture Controls Adjust hue, brightness, etc.
5 Real-Time Monitor Live viewing of selected channels
6 Image View Options Controls for number of channels viewable at once plus
other options.
It should be noted that the screen outlined in green is the one that will be affected by any
control inputs and that clicking on another screen will highlight that one instead, making it the
one that will be controlled.
Operations
There are six operations that can be selected; Preview, Search, Alarm, Setup, Info and
Logout. Clicking on any of these will change from the live feed from the camera(s) to a new
window allowing you to set or enable options and functions. Their use will be described later in
this section.
LIVE VIEWING
The Web Service interface has been updated to be compatible with Microsoft’s Internet
Explorer versions 8, 9 and 10. It is always possible that Microsoft may make changes in the
future that will cause your display to place the Camera Controls, Picture Controls or other
panels out of order, as in Picture 3-21 rather than as shown in Picture 3-22.
PICTURE 3-21 PICTURE 3-22
PICTURE 3-23
To resolve this issue, select Compatibility
View in the Tools drop-down to the upper
right of the Explorer Window.
The page will refresh, and you will have to log
in again before continuing.