Remote Monitoring Guide

74 75
Event List: When you set up Push Config (below) to notify you of events such as motion
detection, camera masking (video blind) or a local alarm triggered at the DVR itself, QC View
will keep a log of these events which can be reviewed in this list.
Channel Config: You are able to adjust
the configuration of each video channel to
optimize the performance on your iPad or
iPhone. These settings will not change those
set on your DVR, but instead allow you to
compensate for being in areas where with
poor connectivity, for example.
PICTURE 4-9
PICTURE 4-10
Push Config: This window provides you
a check list allowing you to indicate which
cameras will alert you based on motion
detection, camera masking, or a local alarm
triggered at the DVR itself. When Push is
activated, you will receive alerts on your
mobile device even when you’re not currently
in the program. You can click on an alert and
it will take you directly to video playback of
the incident that triggered the alert.
NOTE! If you like this application, please leave positive feedback in the App
Store.
Favorites: You may configure one or more groups of channels that you to view together using
this button. These favorites can then be selected from the Device Manager list.
Local Config: PTZ camera configuration. Select a PTZ camera connected to your DVR
for control from your mobile device. The slider sets the rotational speed. You can use the
directional controls, or finger dragging on that camera’s video feed, to point the camera. Zoom
in or out using the controls or with your fingers.
Help: Opens the internal help documentation.