Manualshelf

Technical Manual

ManualsBrandsQ-See ManualsDVR/NVRQ-See QC524
31323334353637383940
35
PICTURE 3.4-3
PICTURE 3.4-2
TURN OFF STARTUP WIZARD
Once the DVR is connected to the network and the Internet, there is no need to run the Startup Wizard
again. If you did not turn it off at the end of the setup process, you may disable it.
1. Select System at the bottom of the Main
Menu.
2. Make sure that the General submenu is
selected.
2. Deselect Startup Wizard.
4. Click Save.