Technical Manual

5352
MENUS
CHAPTER 4
MAIN
MENU
Backup
Information
Setting
Record
Settings
Search
Remote
Device
Advanced
Shutdown
HDD Info
Log
Version
Online Users
Remote Device Info
General
RS232
Network
Pan/Tilt/Zoom
Display
Default
Record Setting
Schedule
Alarm
Events
HDD Mgmnt
Alarm Output
Error Alert
Account
Auto Maint.
Config Backup
Once you’re ready to move beyond basic operation, the other menus in the system will allow
you to configure the NVR to your individual needs.
4.1 MAIN MENU
The Main Menu can be accessed at any time from the Live View by right-clicking the mouse
and bringing up the Short Cut Menu. Pressing the Return button on the side of the NVR will
also bring up the Main Menu.
There are eight submenus available; Search,
Record Settings, Setting, Remote Device,
Advanced, Backup, Info and Shutdown.
Clicking on an icon will take you to that
function or the submenu it represents.
The Search menu is covered in Section 3.5
Search and Playback.
MAIN MENU
SEARCH
INFO
ADVANCED BACKUPREMOTE DEVICE
SHUTDOWN
SETTING
RECORD SETTINGS
PICTURE 4-1
PICTURE 4-2
PICTURE 4-3
4.2 INFO MENU
Double-clicking on the Info icon will open the Info window. There are either five or six options
depending on your model: HDD (Hard Disk Drive) Info, Log, Version, Online Users,
Remote Device Info and Net Resource Info.
HDD INFORMATION
This window displays information on the type, size, available space and status of the system’s
internal hard drive.
The system supports a single A/V-rated SATA
hard drive and it will be designated SATA
1. Below the drive name is the drive status
indicator.
“O” Drive is operating normally.
“X” Indicates an error
“-“ Hard drive not installed
“?”Hard drive is damaged