Remote Monitoring Guide

52 53

PICTURE 3-53

PICTURE 3-54

Tool Bar

This section of the PSS display contains many of the controls for on-screen viewing.

Device List - This is where you access the NVR(s) you wish to view and control from the

software. This function was covered earlier in this section under “Connecting to the

NVR.”

This is also where you access the NVR itself to change settings.

Step 1. In Device List, right click on the NVR

you wish to access.

Step 2. Click on Advanced in the menu.

Step 3. Click on Device Conﬁg in the

submenu.

The Device Conﬁguration menu gives you access to the Setting and Advanced menus on

the NVR. You can make changes or add new settings in the same manner as if you were at

the NVR itself. These operations are covered in Chapters 3, 4 and 5 of the User Manual.

PTZ Direction - This operates in the same

manner as the PTZ controls on the

NVR itself as shown in Controls in

Section 6.2.

By clicking on the padlock icon at the

top of this menu, you can separate

this control from the rest of the

display and position it anywhere on

the screen. Clicking on the padlock

returns it to its position in the main

display.

PTZ Advanced - Like the main PTZ controls,

this control panel replicates the

operations found on the NVR. The

user can activate presets, tours and

patterns plus other features that are

dependent upon the model of PTZ

camera in use.

PICTURE 3-55

PICTURE 3-56