Remote Monitoring Guide

76 77
OBTAINING IP INFORMATION USING IPCONFIG
You will need to get your router settings to not only create an IP address, but for the Default
Gateway information as well.
To get the router settings:
STEP 1. To access the router’s settings you will need to enter the Command (CMD)
panel on a computer also connected to the same router.
STEP 2. Type “ipconfig” at the prompt
(Red arrow in Picture 4-37) to
access router settings.
STEP 3. Write down the IP4v address
(Blue arrow) as well as the gateway
and subnet mask numbers (Green
arrows).
A. WINDOWS XP – Select Run from
your Windows START menu (lower
left of screen) and type “cmd” after
the prompt.
Microso Office Outlook 2007
Microso Internet Explorer
All Programs
Devices and Printers
Default Programs
Help and Support
iTunes
Adobe Acrobat
Inbox Microsof... iTunes
start
start
Shut Down
Log Off
Run
B. WINDOWS VISTA and WINDOWS
7 – Click on the START menu
(Windows icon) in the lower left of
your screen. Type “cmd” into the eld
that says, “Search programs and
files” and hit ENTER or click on the
magnifying glass icon.
PICTURE 4-35
PICTURE 4-36
PICTURE 4-37
Microso Office Outlook 2007
Scky Notes
All Programs
Devices and Printers
Default Programs
Help and Support
Shut down
iTunes
Adobe Acrobat
cmd
Enter the information into the proper fields in ConfigTool’s IP Address Modification window.
Click OK to save, and you will see the information update in the Device List.
Right-click on the camera to open it in the Web Service browser program and proceed as
described in Section 4.2, above.