Technical Manual

2 3

reserved. This manual and software and hardware described herein, in whole or in part, may not be

reproduced, translated, or reduced to any machine-readable form without prior written approval.

Trademarks: All brand names and products are trademarks or registered trademarks of their respective

owners.

Q-See is a registered trademark of DPS, Inc.

Disclaimer: The information in this document is subject to change without notice. The manufacturer

makes no representations or warranties, either express or implied, of any kind with respect to

completeness of its contents.

Manufacturer shall not be liable for any damages whatsoever from misuse of this product.

Thank You for Choosing a Q-See Product!

All of our products are backed by a conditional service warranty covering all hardware for 24 months

from the date of purchase. Additionally, our products also come with a free exchange policy that covers

all manufacturing defects for one month from the date of purchase. Permanent upgrading service is

provided for the software and is available at www.Q-See.com.

Be certain to make the most of your warranty by completing the registration form online. In addition to

warranty and technical support beneﬁts, you’ll receive notiﬁcations of product updates along with free

downloadable ﬁrmware updates for your NVR. Register today at www.Q-See.com!

Please see the back of this manual for exclusions.

About this Manual

NOTE! Text in blue boxes with the Information icon offer additional guidance

and explanations about how to make the most out of your system.

IMPORTANT! Red boxes with this icon indicate warnings. To prevent

possible injury or damage to the product, read all warnings before use.

Rev. 3.0 2/20/2014

This manual is written for the QC800 Series of Network Video Recorders (NVRs) and was accurate at

the time it was completed. However, because of our ongoing effort to constantly improve our products,

and the different capabilities of the three models additional features and functions may have been added

since that time and on-screen displays may change. We encourage you to visit our website at www.Q-

see.com to check for the latest ﬁrmware updates and product announcements.

This manual covers the setup and local operation of the NVR. Instructions for conﬁguring the NVR for

remote access, along with instructions for monitoring the NVR using a computer or mobile device, are

contained within the Remote Monitoring Guide which is included on the CD that accompanied your

NVR and which can also be found on www.Q-See.com/support.

Throughout the manual we have highlighted warnings and other important information that will assist

you in operating your new system in a safe and trouble-free manner. Please take the time to read and

follow all instructions and pay attention to alerts as shown below: