Technical Manual

14
2.3 REMOTE CONTROL
The buttons on the Remote Control operate in the same manner as on a conventional video player remote.
Some buttons have multiple functions depending on which menu is being accessed.
PICTURE 2.3-1
# Name Function
1 Power
Button
Turn on or shut down the DVR before turning it
off with the power switch.
2 Address An additional security feature. You can require
the DVR to ask you to enter the Device
Number (found in the General Settings menu)
before being able to access the log-in screen.
3 Fast
Forward
Multiple fast forward speeds in Playback mode.
Zoom in when in PTZ mode.
4 Next
Record
Goes to next video in Playback mode.
Adjust focus when in PTZ mode.
5 Slow Play Multiple slow playback speeds and resumes
normal playback.
Zoom out when in PTZ mode.
6 Play/Pause Will open Playback/Search mode.
Begins playback of selected video or pauses
current video.
Adjust Iris (light level) in PTZ mode.
7 Previous
Record
Goes to previous video in Playback mode.
Adjust focus when in PTZ mode.
8 Reverse/
Pause
“Rewind” current video or resume normal
playback.
Adjust Iris (light level) in PTZ mode.
9 Escape Cancel current function or exit current menu.
10 Enter Select default button. Go to main menu.
11 Multi-view
mode
Cycle through available multi-screen display
modes.
12 Record Opens recording interface. Use directional keys
to select recording mode and channel.
13 Directional
Keys
Navigate through menus.
Cycle through channels in single- or 8-screen
viewing mode.
Control Playback progress bar in Playback
mode
Control PTZ camera and switch menus in PTZ
mode.
14 Function Opens volume control.
Switches PTZ control menu
Use with Directional keys to set up Motion
Detection
15 0-9 Keys Use in similar manner to phone keypad to enter
password, etc.
Push number to select desired channel for
viewing.
3
4
5
6
7
8
9 12
10
13
11
15
14
1 2
NOTE! Some DVRs are not
designed to be used with a
remote control and one will
not be included with those
models.