Technical Manual

28
PICTURE 3.2-1
3.2 PLAYBACK
Once you’ve selected your video(s), you can control the playback in the same manner as using a VCR or
computer’s media playback software using the controls below the video screen.
You can also play in reverse as well as forward, frame-by-frame movement and multiple playback
speeds.
Double-clicking on a screen in a multi-channel display format will switch to a single-channel display.
Double-clicking again will enlarge it to full screen mode, hiding the Search area on the right and the
Video Indicator and Progress bar below, although the latter will pop up if the mouse is moved to the
bottom of the screen. Double-clicking a third time will revert back to the multi-channel display mode
that you had selected. Right-clicking when in single screen or full-screen mode will reverse the process.
Right-clicking while in your original viewing mode will end the video playback.
Most of the time, the control buttons affect the video on all screens in a multi-channel display.
Unchecking the Sync box at the bottom of the screen will allow independent control of each channel.
In this case, the controls will only affect the screen highlighted in green. Click once on a camera’s view
to select that channel. It should also be noted that certain functions only work - or work best - in single-
channel viewing mode.
From R/W HDD
Jan
1
3
2
4
2012 ><
Su Mo Tu We Th Fr Sa
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30 31
24hr
00: 00: 00 - 00: 00: 00
Stop Sync All Record Normal Alarm Motion
242322212019181716151401211109876543210
CAM 1
1/23/12 08:19:021/23/12 08:19:02
1/23/12 08:19:02
1/23/12 08:19:02
1/23/12 08:19:02
1/23/12 08:19:02
1/23/12 08:19:02
1/23/12 08:19:02
CAM 2
CAM 3 CAM 4
CAM 1 CAM 2
CAM 3 CAM 4
REC
Interval
PIC
1
2hr 1hr 30min