User Manual

Get Connected

Step 2: Connect Your Cameras

A. Plug the camera network cable into the camera

by connecting the Ethernet cable into the camera

network port. You should hear a clicking sound as

you connect to the port.

B. Move the white weather-proof housing up and twist

to secure the cover over the port. Tighten the base

of the cover to complete the weather-proof seal.

Step 1: Registration

Before installing, please register your device on the

Q-See Support Portal at www.q-see.com/register to

receive critical updates and support for your system.

Registering will also help us to assist you with any

technical or warranty issues if ever necessary.

Please be sure to keep a record of your model

number(s) and to save this guide, as you will need

this information if you are ever in need of technical

or warranty support.

NOTE: Your username and password used to register your device are

not the same as those you use to log in to your system. Please write

down your username, password, and model number(s) in the spaces

provided below:

Username:

Password:

Model #: