Instructions / Assembly
The reset button on your dome camera
is located under the lens cover that can
be removed with the included wrench.
If you wish to change the existing Wi-Fi
network to a dierent network, while the
camera is powered on, hold the reset
button for ve seconds and setup your camera again.
The SD memory card slot is located under the lens cover that can be removed
with the included wrench. Slide the slot open, place in a memory card, close
the slot and lock the card into position. Some units will include an SD card.
ADDITIONAL FEATURES
RESET BUTTON
MEMORY SLOT
16 17
Please do not worry about the additional
network cable on your dome camera. This
network cable can alternatively be used to hard-
wire the camera using a cat5 cable instead of
a Wi-Fi connection. Please make sure that this
cable is never exposed to moisture.
NETWORK CABLE