User Manual MODEL QD6001D QD6002D QD6003D QD6004B QD6005B QD6501B QD6502B QD6503X High-Resolution Security Cameras 1
About this Manual Thank You for Choosing a Q-See Product! All of our products are backed by a conditional service warranty covering all hardware for 12 months from the date of purchase. Additionally, our products also come with a free exchange policy that covers all manufacturing defects for one month from the date of purchase. Permanent upgrading service is provided for the software and is available at www.Q-See.com. Be certain to make the most of your warranty by completing the registration form online.
TABLE OF CONTENTS INTRODUCTION INTRODUCTION 5 For your safety Components and Connection 6 To prevent damage to your Q-See product or injury to yourself or to others, read and understand the following safety precautions in their entirety before installing or using this equipment.
QD6005B AND QD6502B COMPONENTS AND CONNECTION QD6001D 1 QD6002D 5 1 6 7 2 1 2 3 4 3 6 Component # Component 1 Clear Dome 1 Optics (lens and IR LEDs) 2 Case 2 Focus (behind rubber plug) 3 Base Release Screw (both sides) 3 Body 4 Mounting Base 4 Mounting Base 5 Multi-Function Button 5 Zoom (behind rubber plug) 6 Power Connector 6 Multi-Function Button 7 Video Connector (BNC) 7 Power Connector 8 Video Connector (BNC) 1 7 8 QD6004B AND QD6501B 2 8 6 6 9 3 2 3
DOME CAMERAS (QD6001D, QD6002D and QD6003D) STEP 1. The mounting base on the dome cameras will need to be removed prior to installing the camera. The method for removing the base varies by the model: QD6001D - Using the included hexagonal wrench, unscrew the two bolts from the side of the camera. QD6001D Base QD6002D - The base of this camera unscrews from the rest of the body. CONNECTING THE CAMERA TO A SECURITY DVR SYSTEM STEP 1.
CONNECTING THE CAMERA TO A TV OR MONITOR A single camera can be connected directly to a monitor or TV with an RCA input using the included cable and a separately available adapter if needed. STEP 1. Connect the camera to the cable and power supply as described in Steps 1, 2 and 5 above before connecting it to your video display. CAMERA TV or MONITOR For Television: You may need to tune or select the correct INPUT (i.e.; A/V, L1, L2, Source) Consult your television’s manual for details.
SHUTTER/AGC BACKLIGHT The Shutter setting controls how much light is used to “expose” each frame while AGC, or Automatic Gain Control “amplifies” the image to show more detail. As a general rule, the AUTO setting will be sufficient as the camera will automatically adjust to changing light levels. In the rare situation where automatic settings aren’t ideal, you can chose to adjust the automatic settings or manually set the values by selecting AUTO or MANUAL respectively.
MOTION DETECTION DAY/NIGHT MODE Unlike most security cameras, your camera is capable of detecting motion by itself. If you are connecting your camera to a Q-See security DVR, you will not need to enable this feature as the DVR itself has motion detection capabilities. Enabling motion detection on the camera while connected to a security DVR can produce adverse results by obscuring the recorded video or generating artifacts which the DVR will interpret as motion causing it to record unnecessarily.
CAMERA ID You can enter an identifying name for your camera that will appear over the video image if you so choose. This will appear in addition to any similar identification made using a DVR. You can enter two lines of text with up to 26 characters each. Currently, only one such identification field - CHR1 - is supported.
Q-SEE PRODUCT WARRANTY Q-See is proud to back all of our products with a conditional service warranty covering all hardware for 12 months from the date of purchase. Additionally, our products also come with a free exchange policy that covers all manufacturing defects for one month from the date of purchase. Permanent upgrading service is provided for the software.
Digital Peripheral Solutions, Inc. 8015 E.
