User Manual EFFIO-E CAMERAS High-Resolution Security Cameras 1
Thank You for Choosing a Q-See Product! About this Manual All of our products are backed by a conditional service warranty covering all hardware for 12 months from the date of purchase. Additionally, our products also come with a free exchange policy that covers all manufacturing defects for one month from the date of purchase. Permanent upgrading service is provided for the software and is available at www.Q-See.com.
TABLE OF CONTENTS INTRODUCTION 5 INSTALLATION 6 Mounting Your Camera 6 Connecting the Camera to a Security DVR System 8 Connecting the camera to a TV or Monitor 9 Controlling Your Camera 9 OPERATION Setup Menu Lens Shutter/AGC White Balance Backlight Picture Adjust ATR Motion Detection Privacy Day/Night Mode NR (Noise Reduction) Camera ID SYNC Language Camera Reset 4 INTRODUCTION 10 10 11 11 12 12 13 13 14 14 15 15 16 16 16 16 TROUBLESHOOTING 17 Q-SEE PRODUCT WARRANTY 18 For your safety
BULLET CAMERAS INSTALLATION STEP 1. At the desired location, use the included mounting template to drill the holes for the mounting screws MOUNTING YOUR CAMERA STEP 2. Insert the plastic expanders into the holes When installing your camera, it is important to select a proper site not only for field of view, but for other considerations as well: STEP 3. Mount the camera using the included screws. Distance from viewing/recording device.
CONNECTING THE CAMERA TO A TV OR MONITOR CONNECTING THE CAMERA TO A SECURITY DVR SYSTEM CAMERA STEP 1. Connect the BNC and power leads from the camera to the matching connectors on one end of the power and video cable. Some box cameras require a special adapter with bare wire leads. The ends of the wires must be inserted into the Positive (+) and Negative (-) ports on the power input box at the back of the camera. The power cable plug connects to the attached female power jack on this adapter.
LENS OPERATION The On Screen Display (OSD) built into your camera allows you to control almost every aspect of how it captures images. Using the built-in menus, you can control brightness, contrast, white balance, shutter speed and other functions. It should be noted that these settings must be made at the camera itself and they cannot be set remotely. When used with a security DVR system, what you see on the screen will be what is recorded - including the OSD menu.
WHITE BALANCE There are seven modes available for determining how your camera processes and displays color: ATW - Automatic Tracking White Balance. This is the default the camera constantly analyses and adjusts to create a neutral white balance. Colors may be slightly underexposed but generally accurate. Several settings can be modified, but the most significant is the Environment setting which adjusts the white balance based on the light source.
MOTION DETECTION DAY/NIGHT MODE Unlike most security cameras, your camera is capable of detecting motion by itself. If you are connecting your camera to a Q-See security DVR, you will not need to enable this feature as the DVR itself has motion detection capabilities. Enabling motion detection on the camera while connected to a security DVR can produce adverse results by obscuring the recorded video or generating artifacts which the DVR will interpret as motion causing it to record unnecessarily.
CAMERA ID You can enter an identifying name for your camera that will appear over the video image if you so choose. This will appear in addition to any similar identification made using a DVR. You can enter two lines of text with up to 26 characters each. Currently, only one such identification field - CHR1 - is supported. To enter text, use the multi-function button to navigate to the desired character and then press the button to enter it and the cursor will advance to the next position in the name.
Q-SEE PRODUCT WARRANTY Q-See is proud to back all of our products with a conditional service warranty covering all hardware for 12 months from the date of purchase. Additionally, our products also come with a free exchange policy that covers all manufacturing defects for one month from the date of purchase. Permanent upgrading service is provided for the software.
Digital Peripheral Solutions, Inc. 8015 E.