Technical Manual

12
Q-See Model
Number
QS50B (50’)
QS100B (100’)
QSVRG60 (60’)
QSVRG100 (100’)
QSVRG200 (200’)
QS59500 (500’)
QS591000 (1000’)
Maximum Run Length 180’ 800’ 800’
Quality Output Standard High High
Type 75ΩVideoCable RG-59 RG-59
Shielded No Yes-ULRated Yes-ULRated
Plenum Rated No No No
Pre-AttachedConnector
Video BNC BNC None
Audio N/A N/A N/A
Power 2.1mm 2.1mm None
Usage Indoor/Outdoor · Do
not run inside walls or
underground
Indoor/Outdoor · In-wall or along wall
For best results, it is highly recommended that you use RG-59 cable.
ToextendtheRS485datacable,youmayuseany24gaugewire,includingCat5.
To maintain video quality:
· Video quality is always enhanced by using shielded cables.
·Alwayscheckstateandlocallawsbeforeinstallingcameras.(2011NEC820.44)
· To prevent video signal loss, run one continuous cable between the camera and DVR for
best results. If more length is required, use the minimum number of inter-connection points
possible.
Other notes:
· If a cable run exceeds 800ft, we recommend using RG-6 coaxial cable which is available at
most retail building supply companies.
·Ifyourhomeorbusinessispre-wiredwithCAT-5cable,thenyoucanrunupto1000ft.
Powered video baluns are required for easy installation.
WHICH CABLE TO USE?
Your cabling needs will depend on the distance between your camera and your DVR. Q-See
offers several cables to fit specific needs. These may be purchased from the same location as
where you bought your camera, or on our website: www.q-seestore.com