Technical Manual

Fig1

Slide the carrier body out of the cartridge frame (Fig1)

CAUTION

DON'T take out HDD

when DVR running!

........

Fig3

Push the tray into the cartridge frame until fully

inserted and handle pushed downward (Fig3). Lock

tray in place and power up unit. A New HDD should

always be formatted (see HARD DISK SETUP Menu).

Connect the HDD data cable and the power cable to

the HDD (Fig2)

Fig2

Key Lock

A: Locked Non-removable

B: Unlocked(Removeable)

3.2 Connect Cameras and Monitor

There are 4 camera inputs and 2 monitor outputs ( BNC connectors).

3.3 Connect Power

Please use only the power adapter supplied with your DVR.