User Guide

seaRCh PlayBaCk
From the Main Menu select SEARCH to display the Video Search Menu shown to the right. If
you input a specic date and click Search, you will nd all the recordings for that day. When
you select an item, you will playback the recordings in 4 channel mode; or, click [File list]
button to display File list interface, where you can playback or backup the le you selected.
See File List heading below.
In the playback window you can play video Forward at 2x, 4x, and 8x speeds, Slow play
at 1/2x, 1/4x, and 1/8x, or normal play, pause and play frame by frame using the playback
control bar, and adjust volume by clicking or sliding tune control bar. When playback has
nished, system will return to previous menu.
File list
On the Video search menu mode, click File list to display the sub-menu shown in the picture
on the left.This option will allow you to view all of the available les by channel and type (all,
normal, or alarm).
You can select a le and push the SEL button to playback the le, or use the FWD button and
down button to select the backup option and backup the recorded le you selected. You can
also put a checkmark in the BAK box at the end of multiple les if you want to backup more
than one le. See section 5.2.4 Search Recordings in the User Manual for more information on
using the File List option.
settinG UP the dVR to PlayBaCk BaCkinG UP the Video on the dVR
Attach a USB ash drive or USB hard drive to the USB backup port and follow the instructions
in Part 8 to go to the File List in the Search menu.
If you want to backup a single recorded le from the le list, from the File List dialog
box pictured above, select the le you wish to back up by placing a check mark in the
accompanying green box and hit the [BACKUP] button on the right of the screen. You will then
receive a pop up screen as illustrated in the rst picture below showing you the progression
of your backup. Once backup is complete, you will then receive a pop up message informing
you that you have backed up your les successfully as illustrated in the second picture below.
Note that all les will be in an H264 format that can be converted to AVI using the Multi Player
program that comes with the DVR or through the net-viewer program. Once converted, you
can then view these les through any program that supports an AVI format.
Questions or Comments? Contact Us
CUstomeR seRViCe
Phone: [phone] x 538
Email:[e-mail]
Live Chat: www.q-see.com
teCh sUPPoRt
Phone: [phone] x 539
Email:[e-mail]
Live Chat: www.q-see.com
mailinG addRess
Q-See Products
Digital Peripheral Solutions, Inc.
8015 E. Crystal Drive
Anaheim, CA 92807
Fax
714-998-3509
WeBsite
http://www.Q-See.com