- Digital Peripheral Solutions Home Security System User Manual

Operation Manual-4CH Duplex DVR
10
Logout
Channel auto sequence. The iron “ ” won’t display if the order of “auto sequence” is
“OFF”.
Move the mouse up or down to move the cursor. Click a left mouse button to change the
settings. Click a right mouse button to go back to the previous.
Hold the left mouse button to click the icon “ ”. You will see the screen below on the
monitor (Fig (b)).
B: The DVR Front Panel or Remote Control
After system boot-up, Press the “MENU” button on the DVR front panel or remote control
and there will be a login window. There is one factory-preset login “account/password”
“admin/111111” at admin level. The user can use it to login to the system for the first time.
After logging in to the system, press “MENU” button to make any changes to the DVR
settings and you will see screen on the Menu options on the monitor as Fig (b). Then press
the “UP” or “DOWN” key on the DVR front panel or remote control to move the cursor. Press
“SELECT” button on the front panel or remote control to change the settings. In the MAIN
MENU, the cursor “ ” will be shown on the screen right next to each sub menu. To return
to the previous screen, press “MENU” button on the front panel or remote control.
6.1 Camera
Use this option to adjust the color for each channel (1,2,3,4). Go to DISPLAY for the option
to enable or disable each camera appearing on the screen display. Under the camera name
Fig (b)