Technical Manual

User Manual
25
5.2.7.3 Video Setup
5.2.7.4 Language
5.2.7.5 Info.
5.2.7.6 System Maintenance
Enter into [System Language] menu to select the language
you want to use on the DVR (shown as Picture 5-45) and click
[APPLY] button. The selection will be available after system Auto
restarts.
Click [Main Menu SystemInfo] to enter into [System
Information] menu to view system info, including Device type, Software
(firmware) version and MAC address etc.
This option allows you reset the DVR to factory default settings,
update system software (firmware), and set system auto-maintenance.
Click [Main menuSystemMaintain] to enter into the [System
Maintain] menu (shown as Picture 5-47).
When opening auto-maintain function, you can setup system to restart
regularly.
Click [Main MenuSystemVIDEO] to setup Video, here you
can set Camera system
（PAL, NTSC）In the USA we use NTSC. Note: This model does
not have a VGA port so VGA resolution does not apply
Picture 5-46
Picture 5-44
Picture 5-45
Picture 5-47