QSDT404C User’s Manual Contact US: Q-see Products 8015E.Crystal Dr Anaheim, CA 92807 Website: http://www.q-see.com Customer Service: Phone: 877-998-3440 x 538 Email:cs@dpsi-usa.com Tech Support: Phone: 877-998-3440 x 539 Email:ts@dpsi-usa.
TABLE OF CONTENTS FCC STATEMENT………………….………………………………….……3 1. INTRODUCTION.…………………………………..…………………....3 2. WHAT’S INCLUDED…..…………………………………………………3 3. MAIN FEATURES……………………………………..………………....3 4. BUTTONS ON RECEIVER………………….…………………………..4 5. SIDE PANEL………………….…………………………..………………5 6. CAMERA INSTALLATION………………….……………………………6 7. MENU…………………………………………………………………….. 7 8. TROUBLESHOOTING………………….…………………………..……8 9. TECHNICAL SPECIFICATIONS……………………………………….. 9 10. NOTES…………………………………………………………………. 10 Q-SEE PRODUCT WARRANTY………………….
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Buttons On Receiver 4.1 Mode switching Switch between quad mode and single channel mode 4.2 Pairing Pairing the cameras and receiver 4.3 Menu OSD menu display 4.4 Auto Scan Switching the channels automatically with set time interval 4.5 Right/CH2 Move to the Right / Switch to Channel 2 4.6 Up/CH1 Move Up / Switch to Channel 1 4.7 Manual Scan Switching the channel manually 4.8 Down/Ch3: Move Down / Switch to Channel 3 4.9 Left/CH4 Move to the Left / Switch to Channel 4 4.
Side panel 5.1 A/v output 5.
Camera Installation 6.1 Camera stand mounting screw (for ceiling mount) 6.2 Power in cable (DC 5V input) 6.3 Pairing button 6.4 SMA antenna plug 6.5 Camera stand mounting screw (for desk top mount) 6.
Menu Enter the Menu option to setup the main feature of this product. Through Right/Left button can adjust parameters, and through Up/Down button can select the features to set. 7.1 Resolution (High / Low): When set to low, the image is not as clear, but it displays more frames per second. When set to high, the image will be clearer, but it displays fewer frames per second. 7.2 SCAN TIME: This option sets the time interval between cameras when switching channels automatically.
Press the Pair the button on corresponding camera and wait for a while, the monitor connected to the receiver will display the images from the cameras that have been matched. Pairing succeeded. 7.6 TV OUT: This option allows you to select the video format (NTSC/PAL) for video output resources. In the United States we use NTSC format. 7.7 Channel selection keys You may select channels by using the corresponding keys on the receiver to manually choose channel.
Technical specifications 9
Notes 10.1 This product can be damaged by pressure or impact. 10.2 Any repair of this product should only be done by Professionals. 10.3 This product should only be opened by Professionals. 10.4 This product can not be used in high temperature environments. 10.5 Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part.
Customer Information Card User’s Name Mr./Mrs. Company Name Postal Address Postal code Phone Number E-mail Model Number of Product Serial Number of Product Purchase Date Distributor If you have questions: Contact Us: Mailing Address: DPS Inc. 8015 E. Crystal Dr Anaheim, CA 92807 Customer Service: Phone: 877-998-3440 x 538 Email: cs@dpsi-usa.com Website: http://www.q-see.com Fax: 714-998-3509 Tech Support: Phone: 877-998-3440 x 539 Email: ts@dpsi-usa.
The material in this document is the intellectual property of our company. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without our company’s prior written permission. 1. Our products are under continual improvement and we reserve the right to make changes without notice, therefore no guarantee is given as to the correctness of its contents. 2. We do not accept any responsibility for any harm caused by using our product. 3.