- Digital Peripheral Solutions Security Camera - IP Server User Manual

QT19D328SC Users Manual
14
Note: If time recording has been setup on this machineand power is connected during this period, then
the machine will start and enter into quad mode directly without needing to press
on/offbutton again to start
the machine.
If the channel numbers and time are not being displayed, please pressENTER button on the remote control
unit or panel, and the channel numbers and time will be displayed on the screen.
NOTE: If the hard drive has not been installed before turning on the systemor the hard drive is not
detected by the system after turning it on
the monitor with hard drive will set off the alarmPlease log into
the system to turn off the alarm.
3.2.2 System Login
Note: Pre-delivery code for this system is000the default password for administrator is 88888888and it is
00000000 for user. Administrator has all operating rights. In order to insure secure running of the system,
administrators should change its code and default password of the machine as soon as possible.
When the host machine is starteduser can only operate the system when logged in (if the
password is effective). If there is no activity within 100 seconds after logging in, the system will enter into lock
up state
When the machine is just started or under lock up state, press the Login/LockButton on Remote Control
Unitthe login interface will appear on the screen, type in the code of the systemPre-delivery setup000”), and then
type in the passwordpassword for administrator or user of this machine.
If correct users password is typed inthe monitor will show Password Correct” message on the screenand
then after [Return] for confirmationusers can operate each of the items within the permitted fields (the default
password for user is00000000).
If correct administrator’s password is typed inthe monitor will show “Password Correct” message on the
screenand then after [Return] for confirmationadministrator can do all of the operations on the systemThe
default password for administrator is88888888).
3.2.3 System On and Off
When the system is monitoring video, please press the on/offbutton in the remote control unit twice if you