- Digital Peripheral Solutions Security Camera - IP Server User Manual

QT19D328SC User’s Manual
24
will start a new file.
C) USB Settings: Select Setup and press the Enter button. You will have two options, Disable and Enable. Select Enable
to active the USB port. After you select this option on press Enter the DVR will restart. After enabling the port you can
connect the USB 2.0 port on the DVR to a USB 2.0 port on a PC you will be able to back up the files from the hard
drive on the DVR to the hard drive on the PC.
Playback: You will have an icon for the DVR in My Computer on the PC. The PC will find the new hardware and will
put a new drive letter in "My Computer". Open the new drive letter by clicking on the icon to see the files. You can play
the files back using the client program that comes with this DVR through the record info option and local playback.
NOTICE: You will need to backup the entire hard drive from the DVR to the hard drive on the PC before you
will be able to select individual files for playback.
G) Video Spot Settings: When you attach a monitor to the second video out port it will display each of the cameras in
sequence. You can use this option to select the length of time that each camera appears before switching to the next camera.
The options are 5, 10, and 15 seconds.
3.4 Screen Settings
When the system is in the single screen mode you can adjust the picture quality

Brightness

: press the analog key on the remote control, the screen will show “Brightness” on the top right hand corner.
Press “–” or “+” to adjust the brightness as desired.
Saturation

: Press the “Analog” key for second time and “Saturation” appears on the top right hand corner. Press “–” or “+”
to adjust the saturation as desired.
Contrast

: Press the “Analog” key for third time and “Contrast” appears on the top right hand corner. Press “–” or “+” to
adjust the contrast as desired.
Hue:
Press the “Analog” key for the fourth time and “Hue” appears on the top right hand corner. Press “–” or “+” to adjust
the color as desired.
Appendix A System Specifications
Monitor 17'' 4:3 TFT/LCD
Video
Video Input Four Channels Independent Input 1.0Vp-p, 75Ω BNC
Video Output
Two Channels PAL/NTSC output，1.0Vp-p, 75Ω BNC, Multiple Video Signal
One Channel VGA display output