Use and Care Manual

35
SystemSystem Date & TimeDate & Time DSTDST
BASICBASIC
DefaultDefault
ApplyApply ExitExit
EDVR
0
NTSC
10
HDMI
English
5
EDVR
0
NTSC
10
HDMI
English
5
Device Name
Device ID
Video Format
Password Check
Show System Time
Max Online Users
Video Output
Language
Logout After [Minutes]
Startup Wizard
No Image When Logout
Device Name
Device ID
Video Format
Password Check
Show System Time
Max Online Users
Video Output
Language
Logout After [Minutes]
Startup Wizard
No Image When Logout
PICTURE 4-4
BASIC MENU
There are three tabs covering System, Date & Time and Daylight Savings Time (DST).
System Tab
The following settings can be changed in this menu:
Device Name: This will display when you
access the NVR remotely via your
mobile device, a web browser or
through the CMS software. Naming
the device will help users recognize
the device when monitoring
numerous NVRs remotely.
Device ID: If you have multiple systems, you
can give this device a numerical ID.
Video Format: Select between NTSC (North
America) or PAL (Europe) video
standards.
Password Check: By enabling this, a
user will need to enter name
and password when performing
configuration operations.
Show Time: Displays the time on-screen in Live View.
Max Network Users: Set the maximum number of network connections - up to 10.
VGA Output: Chose the configuration that best fits your monitor. Options are: VGA 800x600,
1024x768, 1280x1024 and HDMI.
Language: Select your preferred menu language. The NVR will have to restart for this change
to take effect.
Logout After... : You can have the NVR automatically log a user out after a period of inactivity.
The period can range from 30 seconds (.5), 1, 3 or 5 minutes or never.
Startup Wizard: When checked, the Startup Wizard will launch whenever the NVR reboots.
No Image When Logout: The monitor will not display the Live View when this box is checked.
IMPORTANT! After changing the Language or Video Format, the device will
need to be restarted.