Manualshelf

Use and Care Manual

ManualsBrandsQ-SEE ManualsElectrical16 Channel 4K 4TB H.265 NVR Video Surveillance System with (8) 4K Bullet Cameras, 100 ft. Night Vision
31323334353637383940
40
Time Tab
You can set the length of time the NVRs record an event before and after a motion detection
or alarm is triggered as well as how long an individual record is preserved.
PICTURE 4-15
PICTURE 4-16
Pre-alarm record time: This sets the length
of time showing events prior to a
motion detection or sensor-triggered
event that is included in the record.
Post-alarm record: Sets the length of time-
from 10 to 60 seconds - that is
added to the record after the event is
finished.
Expire time: The time - up to 60 days - that
an event is saved on the drive before
it could be overwritten assuming
there’s enough disk space (See
Recycle Record below).
You can set up all channels with same values by selecting All and then configuring one
channel.
Stamp Tab
Select which cameras will display their ID and date stamp and where it’ll appear on the screen.
Drag and drop the location of the camera
name and date/time stamp to your desired
location on the screen. This can be done
individually or globally. A “Before” and “After”
example is shown below.
PICTURE 4-17