Installation Guide

USING A POE POWER INJECTOR
WITH A LOCAL NETWORK
STEP 4
Right-click with the mouse to open the
Control Bar at the bottom left of the
screen. (picture 3)
STEP 5
Click on the Main Menu icon. (picture 4)
Video Loss
PICTURE 3
PICTURE 4
STEP 6
Click on IP Camera. (picture 5)
PICTURE 5
IP Camera
1
1 2 3
4
PWR
2 3 4
UPLINK
UPLINK
STEP 1
Plug the CAT5e network cable into a net-
work port connected to the same router
used by your NVR. (picture 1)
IMPORTANT!: Do not connect
the power supply directly to the
camera!
PICTURE 1
PICTURE 2
STEP 2
Plug the other end of the CAT5e network
cable into the port on the POE Injector
labelled Data In or Uplink. (picture 2)
STEP 3
Connect the power supply to the POE
Injector and plug it into a power outlet.
You will also need:
• A network port that is connected to the same
router used by your NVR
• A power outlet
POE PORTS
POE
Block
POE Injector
POE Injector
Network
Port
INTERNET
INTERNET
Router/
Modem
Router/
Modem
Router/
Modem
Router/
Modem
1
1 2 3
4
PWR
2 3 4 UPLINK
UPLINK
Local Network Internet
Example of
Network Port
CAT5 Network Cable
(Color may differ)
Follow these instructions for connecting IP cameras to the same network as your NVR.
Instructions continue on other side
MODELS:
QAPE102
QAPE801