User manual

19
Wizard Glossary
DST (Daylight Savings Time): Set DST to change where applicable. Click
“Set” to enter the start and end dates. Make sure the box is checked.
NTP (Network Time Protocol): This maintains the accuracy
of the NVR’s clock. Check the box to turn on.
Language: This is the language the NVR will use.
NOTE: If a new language is selected, the NVR will restart. The wizard will
continue in English but menus will be in the selected language.
Local IP Address (LAN): The NVR’s address on your local network.
IP: Internet Protocol. IP devices communicate with each
other via a local network or over the Internet.
POE: Power Over Ethernet. Uses a standard Ethernet cable to transmit power
and commands to the camera while receiving video back from it.
NVR: Network Video Recorder. Work with IP cameras connected to it directly or over a network.
Resources / Appendix