User manual

7
Setting Up Your System
Step 1: Create Your Account
Go to www.Q-See.com/welcome and follow the easy
steps to create your account.
Step 2: Connect Your Cameras
A. Plug one end of the camera cable into the network
socket on the camera. Make sure that you hear a
“click” to ensure a good connection.
ATTENTION: The other camera lead is for use with a
power adapter (not included) when the camera is not
powered by the NVR and a POE (Power Over Ethernet)
switch is not available. Cover with electrical tape if not
used and exposed to weather.
ATTENTION: You must have an account to access:
Free mobile surveillance app, motion detection alerts, and
live customer support.