User manual

146
Switch LUN mapping
The description below applies to non Intel-based NAS models running firmware version 3.3.0 or la te r
and Intel-based NAS models running firmware version 3.2.0 or la te r only.
Follow the steps below to switch the mapping of an iSCSI LUN.
1. Select an iSCSI LUN to unmap from an iSCSI target and click (Disable).
2. Next, click (Unmap) to unmap the LUN. The LUN will appear on the Un-Mapped iSCSI LUN List.
Click (Map) to map the LUN to another target.