User manual

152
4.5.2.1 Connect to the iSCSI targets by Microsoft iSCSI Initiator on Windows
Before you start to use the iSCSI target service, make sure you have created an iSCSI target with a
LUN on the NAS and installed the correct iSCSI initiator for your OS.
iSCSI initia tor o n W ind o ws
Microsoft iSCSI Software Initiator v2.07 is an official application for Windows OS 2003, XP, and 2000 to
allow users to implement an external iSCSI storage array over the network. If you are using Windows
Vista or Windows Server 2008, Microsoft iSCSI Software Initiator is included. For more information and
the download location, visit:
http://www.microsoft.com/downloads/details.aspx?familyid=12cb3c1a-15d6-4585-b385-
befd1319f825&displaylang=en
Start iSCSI initiator from “Control Panel” > “Administrative Tools”. Under the “Discovery” tab click “Add
Portal”. Enter the NAS IP and the port number for the iSCSI service.