User manual

189
4.6 Virtual Disk
You can use this function to add the iSCSI targets of other QNAP NAS or storage servers to the NAS as
the virtual disks for storage capacity expansion. The NAS supports maximum 8 virtual disks.
No te :
The maximum size of a virtual disk the NAS supports is 16TB.
When the virtual disk (iSCSI target) was disconnected, the virtual disk will disappear on the NAS
interface and the NAS will try to connect to the target in two minutes. If the target cannot be
connected after two minutes, the status of the virtual disk will become “Disconnected”.
To add a virtual disk to the NAS, make sure an iSCSI target has been created. Click “Add Virtual Disk”.