User manual

21
Mac Users
1. Choose “Go” > “Connect to Server”.
2. There are two ways to mount a disk:
AFP: type NAS_IP or afp://NAS_IP
SMB: type smb://NAS_IP or NAS_name
For example, 169.254.100.100 or smb://169.254.100.100
3. Click “Connect”.
Linux Users
On Linux, run the following command:
m o unt -t nfs <NA S IP>:/<Ne two rk Sha re Na m e > <Dire cto ry to Mount>
For example, if the IP address of the NAS is 192.168.0.1, to connect to the network share “public”
under the /mnt/pub directory, use the following command:
m o unt -t nfs 192.168.0.1 :/p ub lic / m nt/ pub
No te : You must login as the “root” user to initiate the above command.
Login the NAS with the specified user ID, use the mounted directory to connect to the shared files.