User manual

279
6.6 SNMP Settings
Enable SNMP (Simple Network Management Protocol) service on the NAS and enter the trap address of
the SNMP management stations (SNMP manager), for example, PC with SNMP software installed. When
an event, warning, or error occurs on the NAS, the NAS (SNMP agent) reports the real-time alert to the
SNMP management stations.
The fields are described as below:
F ie ld
De s crip tio n
SNMP Trap Level
Select the information to be sent to the SNMP management
stations.
Trap Address
The IP address of the SNMP manager. Specify maximum 3 trap
addresses.
SNMP MIB (Management
Information Base)
The MIB is a type of database in ASCII text format used to manage
the NAS in the SNMP network. The SNMP manager uses the MIB to
determine the values or understand the messages sent from the
agent (NAS) within the network. You can download the MIB and
view it with any word processor or text editor.
Community (SNMP V1/V2)
An SNMP community string is a text string that acts as a password.
It is used to authenticate messages that are sent between the
management station and the NAS. The community string is included
in every packet that is transmitted between the SNMP manager and
the SNMP agent.
SNMP V3
The NAS supports SNMP version 3. Specify the authentication and
privacy settings if available.