User manual

37
On the TCP/IP Property page, configure the following settings:
Ne two rk Spe e d
Select the network transfer rate according to the network environment to which the NAS is connected.
Select auto negotiation and the NAS will adjust the transfer rate automatically.
Ob ta in the IP a ddre ss s ettings a uto m a tic a lly v ia DHCP
If the network supports DHCP, select this option and the NAS will obtain the IP address and network
settings automatically.
Use s ta tic IP a ddre s s
To use a static IP address for network connection, enter the IP address, subnet mask, and default
gateway.
Jum bo F ra m e Se ttings (MTU)
This feature is not supported by TS-509 Pro, TS-809 Pro, and TS-809U-RP.
“Jumbo Frames” refer to the Ethernet frames that are larger than 1500 bytes. It is designed to enhance
Ethernet networking throughput and reduce the CPU utilization of large file transfers by enabling more
efficient larger payloads per packet.
Maximum Transmission Unit (MTU) refers to the size (in bytes) of the largest packet that a given layer
of a communications protocol can transmit.
The NAS uses standard Ethernet frames: 1500 bytes by default. If the network appliances support