User manual

452
Se t up the IP c am e ra s
In this example, two IP cameras will be installed. Connect the IP cameras to your home network. Then
set the IP address of the cameras so that they are in the same LAN as the computer. Login the
configuration page of the Camera 1 by IE browser. Enter the IP address of the first IP camera as
192.168.1.10. The default gateway should be set as the LAN IP of the router (192.168.1.100 in this
example). Then configure the IP address of the second IP camera as 192.168.1.20.
Some IP cameras provide a utility for IP configuration. You may refer to the user manual of the
cameras for further details.
* Please refer to http://www.qnap.com for the supported network camera list.
Config ure th e ca m e ra s e tting s o n the NAS
Login the Surveillance Station by the IE browser to configure the IP cameras. Go to “Settings” >
“Camera Settings”. Enter the IP camera information, for example, name, model, and IP address.