User manual

456
Go to the configuration page of your router and configure the port forwarding as below:
Forward port 8000 to the LAN IP of the NAS: 192.168.1.60
Forward port 81 to the LAN IP of IP camera 1: 192.168.1.10
Forward port 82 to the LAN IP of IP camera 2: 192.168.1.20
No te : When you change the port settings, make sure remote access is allowed. For example, if you
office network blocks the port 8000, you will not be able to connect to your NAS from the office.
After you have configured the port forwarding and the router settings, you can start to use the
Surveillance Station for remote monitoring over the Internet.