User manual

469
7.11 Syslog Server
Se rver Settings
To configure the NAS as a Syslog server and allow it to receive syslog messages from the clients,
enable Syslog Server. Select the protocols (TCP and/or UDP) the NAS uses to receive syslog
messages. Specify the port numbers if necessary or use the default port number 514. Click “Apply” to
save the settings. After enabling the NAS as a syslog server, enter the NAS IP as the syslog server IP
on the syslog clients to receive the syslog messages from them.
Lo g Se ttings :
Specify the maximum log size (1-100 MB) of the syslog messages, the location (NAS network share) to
which the logs will be saved, and the file name. Once the logs have reached the maximum size, the log
file will be automatically archived and renamed with the archive date as MyLogFile_yyyy_mm_dd, for
example MyLogFile_2011_12_31. If multiple log files are archived on the same day, the file will be
named as MyLogFile_yyyy_mm_dd.[number]. For example, MyLogFile_2011_12_31.1,
MyLogFile_2011_12_31.2, and so on. Click “Apply” to save the settings.