User manual

474
7.12 RADIUS Server
The NAS can be configured as a RADIUS (Remote Authentication Dial In User Service) server to
provide centralized authentication, authorization, accounting management for computers to connect and
use a network service.
To use this feature, follow the steps below:
1. Enable RADIUS Server on the NAS in “RADIUS Server” > “Server Settings”. Click “Apply”.
2. Add RADIUS clients, such as Wi-Fi access points and VPN, on the NAS in “RADIUS Server” >
“RADIUS Clients”. Up to 10 RADIUS clients are supported.
a. Click “Create a New Client”.