User manual

571
Data c opy by fr o nt USB po rt
The NAS supports instant data copy backup from the external USB device to the NAS or the other way
round by the front one touch copy button. To use this function, follow the steps below:
1. Make sure a hard drive is installed and formatted on the NAS. The default network share Qusb/Usb
has been created.
2. Turn on the NAS.
3. Configure the behaviour of the Copy button on “Backup” > “USB one touch copy” page.
4. Connect the USB device, for example, digital camera or flash, to the front USB port of the NAS.
5. Press the Copy button once. The data will be copied according to your settings on the NAS.
No te : Incremental backup is used for this feature. After the first time data backup, the NAS only
copies the changed files since the last backup.
Cautio n: Files are copied from the source to the destination. Extra files on the destination will
be deleted; files of the same names will be overwritten by the source. Source data will remain
unchanged.