User manual

581
Dis k usa ge s ettings for 1-driv e m od e ls
Select one of the following settings for an external storage device connected to a 1-drive NAS:
Data sharing: Use the external drive for storage expansion of the NAS.
Q-RAID 1: Configure the external drive and a local hard drive on the NAS as Q-RAID 1. Q-RAID 1
enables one-way data synchronization from the NAS to the external storage device but does not
offer any RAID redundancy. No te tha t the e x te rna l driv e will be fo rm a tte d whe n Q-RA ID 1
is e x e c ute d.
After Q-RAID 1 has been executed once, the NAS data will be automatically copied to the external
storage device whenever it is connected to the NAS.
No te :
Only one external hard disk can be set as Q-RAID 1 at one time.
It is recommended to use an external storage device of the same capacity as the internal hard
drive of the NAS. If the storage capacity of the external storage device is too small to synchronize
with the internal hard drive, the device can only be used for data sharing.