Operation Manual

11
SELECTING MULTIPLE
MEASUREMENT AVERAGING
Blood pressure constantly fluctuates so a result determined by multiple
measurements is more reliable and accurate than one produced by a single
measurement.
To activate the Multiple Measurement Averaging, which is also useful in case of
pulse irregularity, press the Q menu button (on the top left of the screen), then
press the Settings button.
On the Settings screen you can select the number of measurements and the
pause between measurements (which is set at 30 seconds by default).
When the Multiple Measurement Averaging feature is on, the individual results
during the measurement are not displayed. Your blood pressure will only be
displayed after all measurements are taken. A countdown indicates the remaining
time between measurements. Do not remove the cuff between measurements.
VISUALIZING YOUR HISTORICAL BLOOD
PRESSURE DATA
Press the History button on the Blood Pressure page to see
your historical blood pressure and heart rate data in a table or chart format.