Operation Manual

Bluetooth QardioARM
Forget This Device
setting Bluetooth
Bluetooth
QardioArm
Not Connected
15
RESETTING THE PAIRING ON iOS
In order to reset the pairing, unwrap the cuff from around the
QardioArm to switch on the device and use a paper clip to press
the button on the pinhole on the battery compartment hatch.
You should see a green light shining through.
Use a paper clip to
press reset button
If necessary, go into the Settings of your phone or tablet, select
the QardioArm and select “Forget this device”.
Step 1 Step 2
Step 3
Forget Device
Cancel
Bluetooth QardioARM
Forget This Device