Installation Guide

4. The electrical supply for the spa must include a suitable

rated switch or circuit breaker to open all ungrounded

supply conductors to comply with Section 422-20 of the

National Electric Code, ANSI/NFPA 70. The disconnecting

means must be readily accessible to the spa’s occupant but

installed within 10 feet from the spa water. Check with local

municipalities for additional code requirements.

5. The electrical circuit for the spa must include a suitable

ground fault circuit interrupter (GFCI) as required by NEC

Article 680-42. Your spa requires a Neutrally Protected

(GFCI) Ground Fault Circuit Interrupter, see the illustration on

the following page for the proper wiring for your spa’s GFCI.